• Deutsch
  • English
You are here:Home / Portfolio / Welding machines / Ultrasonic sealing machines / PFAFF 8310 -041/002 with sonotrode from top, Feed-off-the-arm version (from side)

PFAFF 8310 -041/002 with sonotrode from top, Feed-off-the-arm version (from side)

Programmable ultrasonic welding machine with sonotrode from top, Feed-off-the-arm version (from side)
Schutzanzüge / Protective SuitsOP- und Laborbedarf / Surgical and laboratory suppliesMedizinische Matratzen / Medical mattressesOP Bekleidung / Surgical gownsSportbekleidung / SportswearSport Shirts / Sports shirtOutdoor Artikel / Outdoor productsTechnische Textilien / Technical textilesFiltration / Filtration
Touchscreen / TouchscreenArmabwärts Schweißmaschine / Feed-off-the-arm welding machineSonotrode oben / Sonotrode topSD-Card Leser / SD-Card readerUSB Anschluß / USB connection

Ultrasonic welding machines of the Seamsonic series combine all the physical advantages of ultrasonic welding with the whole range of technological sewing experience. On the PFAFF 8310 the workpiece is held between the sonotrode and the anvil wheel and welded continuously under pressure. When welding continuously by the ultrasonic method, the material to be welded will be subjected to rapid changing pressure vibrations. The heat develops because of molecular vibrations beneath the material surface, for thin materials within the immediate vicinity of the actual weld.

Ultrasonic welding with the Seamsonic is a modern, innovative and economic alternative and complementary to conventional sewing technology. If assembling of laminates, clothing fabrics with high share of polymer and technical nonwovens is required and in particular to get, the use of the Seamsonic is the first choice.

Features

  • All parameters controlled electronically (power, amplitude, speed and pressure)
  • Seam distances resp. operating cycles can be programmed (sequence welding)
  • Reproducibility of the welding process
  • The energy adjusts to the speed (via a pedal) = Dynamic welding
  • Equipped with differential feed; separate drive for sonotrode and anvil wheel; that means smooth, non-distorted seams or the possibility of adding a some fullness
  • Process reliability through monitoring of welding parameters with integrated device for constant performance (so that reliable processing is possible even when sewing over cross seams)
  • Possibility of spot welding (tacking)
  • No start/stop – marks
  • Touch screen (simple handling with pictograms). Touch-control-panel P1 with integrated SD card reader and USB slot

P1

  • Titanium sonotrode, up to 10 mm
  • Hardened steel sonotrode, 7 mm
  • Hardened steel sonotrode, 10 mm
  • Welding method: 35 kHz, 400 W Ultrasonic generator


Applications

Filter tubes, supporting shells and pre filters, protection wear and similar articles (tubular)

Specifications

Sealing speed: 0.5 to 10 m/min. option to 20m/min.
Seam width: 1,0 to 10,0 mm
Ultrasonic frequency: 35 KHZ
Connection voltage: single-phase a.c. 230 V, 50/60 Hz

Legal notices | Privacy policy | Sitemap | Terms of service | Conditions of purchase
PFAFF is the exclusive trademark of VSM Group AB. | PFAFF Industriesysteme und Maschinen GmbH is an authorized licensee of the PFAFF trademark.